Skip to main content

Details Of a Standard System Scope Of Cuplock Scaffolding


The need for system scaffolding in the construction industry to carry out demolition, maintenance and repair work is obvious. One of the best staging structures used in Australia is the Cuplock System, which is based on securing nodes with two cups instead of wedges, nuts and bolts. It provides a fast, multiple and simplified system of start-up projects related to this field of work. It offers a quick solution to ensure up to four horizontals at a time through a reliable top cup that makes the joint firm and rigid.

This type of structure is easy to lift and disassemble, leaves no loose ends, requires minimal maintenance and does not use components such as nuts, bolts and wedges. It is better for access or formwork support and has a high load capacity despite being quite light. The varied components of the Cuplock system scaffolding are listed below:

Standard / Vertical Cuplock

It has cup joints at regular distances; The captive moving upper cups are suitable to face the adverse condition of the site. The internal pins link the standards (placed at the top) in the vertical direction.

 Cuplock Ledger

It has a steel blade forged at the ends, which can find the lower cups of the standard while being held by the associated upper cups.

Stern mirror

Each piece is manufactured from twin structural angles that are joined together at the back, with blades forged at the ends.

 Stern mirror Cuplock Omega

This product is manufactured from bent sections with pressure flange extensions on the sides and finds application in the support of the work platform together with steel slats.

Cuplock intermediate crossbar

It is used in cases where the distance between the standards is greater than the length of the boards.

Cuplock interior dash cross member

Cuplock return mirror

It is used to eliminate spaces between two scaffolds.

Stairway Access Crossbar

Connected to the accounting books in the bay, this component is used to create the desired amount of space in the bay to place a ladder.

Cuplock reinforcement

Cuplock cantilever frame

It is equipped with ledger sheets that are held with the cups of the standards and acts as a support component for covers and formwork at the edges.

Beam brackets

These are fixed to the primary vertical support beams, in order to avoid individual verticals to support the work of slabs.

Hop-Up 1/2/3 Support

This type of support is created in the omega sections and in the tube sections to easily place slats so that the forged blades conform to Cuplock standards through a cup joint.
Horizontal uniting cuplock
These components represent the necessary railings in the scaffold passage work platform.

Universal cats

Used in combination with fork heads, socket base and hollow head adapters, this type of screw offers a lifting mode that can be implemented at the top and bottom of a mounting structure.

Socket

It is drilled to insert a fixing bolt, if necessary, when used together with the universal jack.

Loose spigot
Adapter

It is a tool that allows dropheads to easily convert from waffle, channel or metriform support systems to be used with the Cuplock scaffold.

Labels:
Location: India

Comments

Post a Comment

Popular posts from this blog

Techlok Seal Ring

Standard molded seals Depending on the shape and application of the seals, these are made by injection or compression, some are bonded. Seals-Ring-Techne O-rings: From Ø 0.4 to more than 2000 mm, we deliver more than 3,000,000 O-rings every year. More than 10 000 references in stock, a hundred of mixtures possible according to your applications and homologations requested. See  techlok seal ring for more information Among our materials in stock: NBR ACS, EPDM ACS, WRAS, W270, 1935-2004, silicones ACS WAS W270 USP6. Other approvals are available upon request. We also manufacture your machined O-rings made of PTFE, POM, PA, and Polyurethane. On request, our O-rings will answer your food approvals (FDA, 1935/2004), gas, drinking water, medical. For the most aggressive chemical environments such as chemistry and perfumery, Chromex offers its O-ring models coated in FEP or PFA. Our O-rings are also available as assortment boxes. We can also offer rolls of NBR, EPDM, FKM,...
Post a Comment
Read more

pipe scaffolding

Scaffolding / Steel Pipe Building Materials Galvanized Steel Tubes Hot dip galvanized Q235 scaffolding pipe is the main part of pipe and coupler scaffolding systems. The treatment of hot-dip galvanized surfaces has provided excellent appearance with sufficient durability in applications where exposure to salty air or long-term weather is unavoidable. Source: Technocraft Industries Packaging We could offer the packing according to the customer's requirements. The most popular packaging is 61pcs / bundle, 37pcs / bundle, 100pcs / bundle. Fastener type Steel pipe scaffolding type There are usually two types, one with an outer diameter of 48 mm and a wall thickness of 3.5 mm; the other has an outer diameter of 51 mm and a wall thickness of 3 mm; Depending on its position and function, it can be divided into a vertical pole, a horizontal pole, and a sweep rod. According to the "Technical safety specifications for scaffolding steel pipe fasteners for building ...
Post a Comment
Read more

How Reliable Scaffolds Provides Safety to Workers

The type of scaffold that provides the best support for workers is largely up to the task at hand. There are several types of scaffolding that you can choose from to choose the type of scaffolding that will help make your job safer. Scaffolding provides a reliable support to the worker while performing a much higher level of work than the ground. They may be an immovable support structure that remains in place unless disarmed and installed in another location. Other types of footrests have wheeled rollers that allow the operator to move the footrests in certain areas without having to move them to where they are needed to dismantle and disassemble the footrests and continue the work. The cable helps to move the platform from front to back or raise or lower the footrest to a new position, and has fixtures that move the footrest to the desired position and lock the footrest in place. The tubes scaffolding is made of various kinds of materials. Aluminum is a very popular material in ma...
Post a Comment
Read more