Skip to main content

Techlok Seal Ring

Standard molded seals
Depending on the shape and application of the seals, these are made by injection or compression, some are bonded.

Seals-Ring-Techne
O-rings: From Ø 0.4 to more than 2000 mm, we deliver more than 3,000,000 O-rings every year.

More than 10 000 references in stock, a hundred of mixtures possible according to your applications and homologations requested. See techlok seal ring for more information

Among our materials in stock: NBR ACS, EPDM ACS, WRAS, W270, 1935-2004, silicones ACS WAS W270 USP6. Other approvals are available upon request. We also manufacture your machined O-rings made of PTFE, POM, PA, and Polyurethane.

On request, our O-rings will answer your food approvals (FDA, 1935/2004), gas, drinking water, medical.

For the most aggressive chemical environments such as chemistry and perfumery, Chromex offers its O-ring models coated in FEP or PFA.

Our O-rings are also available as assortment boxes. We can also offer rolls of NBR, EPDM, FKM, red or translucent silicone rope.


ferrule-tightness techne
Sealing rings: We offer more than 7000 references in stock as well as the possibility to make machined rings for prototypes or small series, made of elastomer or PTFE. The applications are just as numerous. We also stock mounting tracks for the sealing rings.

The sealing ring is a Chromex specialty for 5 decades, which allows us today to offer more than 50 different profiles among which:

Standard SL / DL ring flooded or apparent cage
High-Pressure DL Ring
Stainless steel PTFE lip cage ring for high temperature, speed, and pressure.
Large monobloc or split rings with fabric reinforcement
Chromex also offers plugs (type TVK), face seals (type RB) and wear tracks (type speedy sleeve).



v-seal-techne
V-Seals: Complimentary product to protect the lips of the sealing rings or when they are not necessary.

The V-seals are intended for the face seal, they make it possible to protect external pollutions with a weak friction force.

We offer 4 profiles to suit all applications (VA, VS, VL, and VE) from Ø 2.7 to Ø 2020.

To reduce the coefficient of friction or to provide mounting assistance on our V-seals, it is possible to apply one of the high-performance surface treatments developed by us.
Labels:

Comments

Post a Comment

Popular posts from this blog

Fundamentals of the fabrics

Fundamentals of the fabric basically, there are three types of fabrics on the market today; these are natural mixtures, synthetic (made by man) or fabrics. Fabric blends are fabrics where natural and synthetic fibers are used to make a type of fabric. Natural fibers are derived from plants or animals; some of the animals used are sheep, goats, alpacas, rabbits and the silkworm, which is used to make fine silk. Fabric Interlock Some of the plants used are bamboo, cotton, linen, hemp, and even pineapple leaves are used. Some of the natural fabrics are wool, silk, cotton, linen and hemp. Synthetic fibers are manufactured by a chemical process where chemicals are forced through small holes called rows. Some of the fabrics produced from these fibers are polyester, nylon, acetate and spandex. When natural and synthetic fibers are used together to create fabrics, many different fabrics can be created, because each fiber acts differently and has its own qualities. When wool and cotton...
Post a Comment
Read more

How Reliable Scaffolds Provides Safety to Workers

The type of scaffold that provides the best support for workers is largely up to the task at hand. There are several types of scaffolding that you can choose from to choose the type of scaffolding that will help make your job safer. Scaffolding provides a reliable support to the worker while performing a much higher level of work than the ground. They may be an immovable support structure that remains in place unless disarmed and installed in another location. Other types of footrests have wheeled rollers that allow the operator to move the footrests in certain areas without having to move them to where they are needed to dismantle and disassemble the footrests and continue the work. The cable helps to move the platform from front to back or raise or lower the footrest to a new position, and has fixtures that move the footrest to the desired position and lock the footrest in place. The tubes scaffolding is made of various kinds of materials. Aluminum is a very popular material in ma...
Post a Comment
Read more

Details Of a Standard System Scope Of Cuplock Scaffolding

The need for system scaffolding in the construction industry to carry out demolition, maintenance and repair work is obvious. One of the best staging structures used in Australia is the Cuplock System, which is based on securing nodes with two cups instead of wedges, nuts and bolts. It provides a fast, multiple and simplified system of start-up projects related to this field of work. It offers a quick solution to ensure up to four horizontals at a time through a reliable top cup that makes the joint firm and rigid. This type of structure is easy to lift and disassemble, leaves no loose ends, requires minimal maintenance and does not use components such as nuts, bolts and wedges. It is better for access or formwork support and has a high load capacity despite being quite light. The varied components of the Cuplock system scaffolding are listed below: Standard / Vertical Cuplock It has cup joints at regular distances; The captive moving upper cups are suitable to face the ...
Post a Comment
Read more