Skip to main content

pipe scaffolding

Scaffolding / Steel Pipe Building Materials Galvanized Steel Tubes

Hot dip galvanized Q235 scaffolding pipe is the main part of pipe and coupler scaffolding systems. The treatment of hot-dip galvanized surfaces has provided excellent appearance with sufficient durability in applications where exposure to salty air or long-term weather is unavoidable.

pipe scaffolding
Source: Technocraft Industries


Packaging

We could offer the packing according to the customer's requirements. The most popular packaging is 61pcs / bundle, 37pcs / bundle, 100pcs / bundle.


Fastener type Steel pipe scaffolding type

There are usually two types, one with an outer diameter of 48 mm and a wall thickness of 3.5 mm; the other has an outer diameter of 51 mm and a wall thickness of 3 mm; Depending on its position and function, it can be divided into a vertical pole, a horizontal pole, and a sweep rod.



According to the "Technical safety specifications for scaffolding steel pipe fasteners for building construction" JGJ130-2011 [1] 3.1.1 Steel scaffolding pipes must adopt the national standard in force "welded steel pipe right welded "GB / T13793 or" welded steel pipe for low pressure fluid transport "GB / T3091 Ordinary steel pipe Q235 specified in steel pipe; the steel grade of the steel pipe must comply with the provisions of the current national standard "Structural carbon steel", steel grade GB / T700 Q235.



3.1.2 Steel scaffolding pipes shall adopt Φ48.3 × 3.6 steel pipe. The maximum mass of each steel pipe shall not exceed 25.8 kg.
Labels:

Comments

Post a Comment

Popular posts from this blog

Techlok Seal Ring

Standard molded seals Depending on the shape and application of the seals, these are made by injection or compression, some are bonded. Seals-Ring-Techne O-rings: From Ø 0.4 to more than 2000 mm, we deliver more than 3,000,000 O-rings every year. More than 10 000 references in stock, a hundred of mixtures possible according to your applications and homologations requested. See  techlok seal ring for more information Among our materials in stock: NBR ACS, EPDM ACS, WRAS, W270, 1935-2004, silicones ACS WAS W270 USP6. Other approvals are available upon request. We also manufacture your machined O-rings made of PTFE, POM, PA, and Polyurethane. On request, our O-rings will answer your food approvals (FDA, 1935/2004), gas, drinking water, medical. For the most aggressive chemical environments such as chemistry and perfumery, Chromex offers its O-ring models coated in FEP or PFA. Our O-rings are also available as assortment boxes. We can also offer rolls of NBR, EPDM, FKM,...
Post a Comment
Read more

How Reliable Scaffolds Provides Safety to Workers

The type of scaffold that provides the best support for workers is largely up to the task at hand. There are several types of scaffolding that you can choose from to choose the type of scaffolding that will help make your job safer. Scaffolding provides a reliable support to the worker while performing a much higher level of work than the ground. They may be an immovable support structure that remains in place unless disarmed and installed in another location. Other types of footrests have wheeled rollers that allow the operator to move the footrests in certain areas without having to move them to where they are needed to dismantle and disassemble the footrests and continue the work. The cable helps to move the platform from front to back or raise or lower the footrest to a new position, and has fixtures that move the footrest to the desired position and lock the footrest in place. The tubes scaffolding is made of various kinds of materials. Aluminum is a very popular material in ma...
Post a Comment
Read more